Skip to content
Mumbai, Maharashtra, 400002

Business hours

Prashaant Steel & Alloys

Monday
24 hours
Tuesday
24 hours
Wednesday
24 hours
Thursday
24 hours
Friday
24 hours
Saturday
24 hours
Sunday
24 hours

You can contact us anytime during the day with your query.

9167418473

A branch line starts with three pipe ends, and the third one is easy to overlook on a material li…

A branch line starts with three pipe ends, and the third one is easy to overlook on a material list. An equal tee has the same nominal size at the run and branch. A reducing tee connects a smaller branch pipe to the main run. For a replacement pipe fitting, mark the two run ends and the branch separately on the dimensioned piping sketch.

PRASHAANT STEEL & ALLOYS handles copper nickel enquiries in CuNi 90/10 and CuNi 70/30. Common wrought grades are UNS C70600 for 90/10 and UNS C71500 for 70/30. For marine pipework, cooling water lines or a pump equipment connection, keep the specified alloy with the fitting description through purchasing and fabrication.

A butt-weld tee joins the prepared pipe ends. Outside diameter and wall thickness at each end matter at fit-up; nominal size alone does not give the welder the complete detail. Include the wall schedule or actual wall dimension called for on the project drawing.

On a confined pipe rack, the centre-to-end distance can decide whether the branch lines up with the next connection. Check that dimension along the run as well as out to the branch. A fitting that matches the bore can still leave the adjoining pipe spool too short or too long.

Based in Gulalwadi, Mumbai, India, PRASHAANT STEEL & ALLOYS is a non-ferrous alloy supplier, stockist and exporter. Discuss copper nickel equal tees and reducing tees for piping contractors, ship repair teams and industrial maintenance projects.

A branch line starts with three pipe ends, and the third one is easy to overlook on a material li…

Next posts